VDO Radio Module RM 8204 Manual de Serviço descarregar pdf (Página 21)

Electrostatic discharge

CAUTION: Some parts are sensitive to electrostatic discharge (ESD). Look for the ESD reminder

when removing product parts. Always perform service work at an ESD-protected workstation or mat, or

use an ESD strap. If an ESD workstation, mat, or strap is not available, ground yourself by touching the

sheet-metal chassis before touching an ESD-sensitive part.

Protect the ESD-sensitive parts by placing them in ESD pouches when they are out of the product.

Required tools

●

#2 Phillips screwdriver with a magnetic tip and a 152-mm (6-inch) shaft length

●

Small flat-blade screwdriver

●

Needle-nose pliers

●

ESD mat (if one is available) or ESD strap

●

Penlight (optional)

CAUTION: Always use a Phillips screwdriver (callout 1). Do not use a Pozidriv screwdriver

(callout 2) or any motorized screwdriver. These can damage screws or screw threads.

Figure 1-1 Phillips and Pozidriv screwdriver comparison

ENWW

Electrostatic discharge

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 169 170

Sem comentários

VDO Radio Module RM 8204 Manual de Serviço Página 21