VDO CR 3300 Instruções de Operação descarregar pdf (Página 15)

11Adjusting the time

• The function TIME ADJUSTMENT

may only be selected if the vehicle is

stationary.

• For an automatic synchronisation of the

chart carrier and the time, the ignition

has to be switched on and there must

not be any chart inserted in the

tachograph 1324.

= Depress key shortly

= Depress key for a longer interval

1. Select the TIME ADJUSTMENT via .

2. Activate the minutes counter via or ,

the minutes start to flash.

3. Depress or key until the desired value

is being displayed.

4. Activate the hours counter via , the hours

start to flash.

5. Depress or key until the desired value

is being displayed.

½ When exceeding or undershooting 00:00, the

date will be adjusted automatically.

6. Acknowledge the time adjustment by depressing

the key for more than 2 seconds. The basic

display will then be shown again.

Comment

If you adjust the time while a chart is inserted, the er-

ror symbol will be shown in the display and the time

will be flashing. The tachograph 1324 will remind

you to update the chart carrier settings;

➥ see page 15.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Sem comentários

VDO CR 3300 Instruções de Operação Página 15